dmesg - NVIDIA GeForce GTX TITAN
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-25-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #37-Ubuntu SMP Thu Jun 6 20:47:07 UTC 2013 (Ubuntu 3.8.0-25.37-generic 3.8.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/Rampage III Extreme, BIOS 1005 08/26/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbf77ffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
kernel direct mapping tables up to 0xbf77ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x33fffffff]
[mem 0x100000000-0x33fffffff] page 1G
kernel direct mapping tables up to 0x33fffffff @ [mem 0xbf77f000-0xbf77ffff]
RAMDISK: [mem 0x36122000-0x37088fff]
ACPI: RSDP 00000000000fb200 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 0003C (v01 082610 RSDT1743 20100826 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 082610 FACP1743 20100826 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0D5F6 (v01 A1545 A1545000 00000000 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: MCFG 00000000bf780470 0003C (v01 082610 OEMMCFG 20100826 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 082610 OEMB1743 20100826 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 082610 OEMHPET 20100826 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 082610 OEMOSFR 20100826 MSFT 00000097)
ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
Initmem setup node 0 [mem 0x00000000-0x33fffffff]
NODE_DATA [mem 0x33fffb000-0x33fffffff]
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x33fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x33fffffff]
On node 0 totalpages: 3143437
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 767970 pages, LIFO batch:31
Normal zone: 36864 pages used for memmap
Normal zone: 2322432 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000
PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88033fc00000 s85056 r8192 d21440 u2097152
pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3094313
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12279384k/13631488k available (7008k kernel code, 1057740k absent, 294364k reserved, 6234k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
NR_IRQS:16640 nr_irqs:256 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3337.718 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.43 BogoMIPS (lpj=13350872)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ACPI: setting ELCR to 0200 (from ccb8)
ftrace: allocating 26695 entries in 105 pages
smpboot: weird, boot CPU (#0) not listed by the BIOS
smpboot: SMP motherboard not detected
smpboot: SMP disabled
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Brought up 1 CPUs
smpboot: Total of 1 processors activated (6675.43 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:19.0: [8086:10ce] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf9de0000-0xf9dfffff]
pci 0000:00:19.0: reg 14: [mem 0xf9ddf000-0xf9ddffff]
pci 0000:00:19.0: reg 18: [io 0xac00-0xac1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xa480-0xa49f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xa880-0xa89f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf9dde000-0xf9dde3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf9dd8000-0xf9ddbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xa000-0xa01f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xa080-0xa09f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf9ddd000-0xf9ddd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x9880-0x9887]
pci 0000:00:1f.2: reg 14: [io 0x9800-0x9803]
pci 0000:00:1f.2: reg 18: [io 0x9480-0x9487]
pci 0000:00:1f.2: reg 1c: [io 0x9400-0x9403]
pci 0000:00:1f.2: reg 20: [io 0x9080-0x909f]
pci 0000:00:1f.2: reg 24: [mem 0xf9dd7000-0xf9dd77ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf9ddc000-0xf9ddc0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:01:00.0: reg 10: [io 0xbc00-0xbc07]
pci 0000:01:00.0: reg 14: [io 0xb880-0xb883]
pci 0000:01:00.0: reg 18: [io 0xb800-0xb807]
pci 0000:01:00.0: reg 1c: [io 0xb480-0xb483]
pci 0000:01:00.0: reg 20: [io 0xb400-0xb40f]
pci 0000:01:00.0: reg 24: [mem 0xf9eff800-0xf9efffff]
pci 0000:01:00.0: reg 30: [mem 0xf9ee0000-0xf9eeffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xf9ffe000-0xf9ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:03:00.0: [10de:1005] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:03:00.0: reg 30: [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:03:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xfbbfc000-0xfbbfffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:06:00.0: [1912:0014] type 00 class 0x0c0330
pci 0000:06:00.0: reg 10: [mem 0xfbdfe000-0xfbdfffff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
pci 0000:05:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:05:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:05:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:05:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:05:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:07:00.0: [1106:3038] type 00 class 0x0c0300
pci 0000:07:00.0: reg 20: [io 0xe880-0xe89f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.1: [1106:3038] type 00 class 0x0c0300
pci 0000:07:00.1: reg 20: [io 0xec00-0xec1f]
pci 0000:07:00.1: supports D1 D2
pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.2: [1106:3104] type 00 class 0x0c0320
pci 0000:07:00.2: reg 10: [mem 0xfbeff000-0xfbeff0ff]
pci 0000:07:00.2: supports D1 D2
pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:02.0: reg 10: [mem 0xfbefe000-0xfbefe7ff]
pci 0000:07:02.0: reg 14: [io 0xe800-0xe87f]
pci 0000:07:02.0: supports D2
pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c71] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.0: enabling device (0106 -> 0107)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15772k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1371359684.388:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 24014
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 17 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 15, io mem 0xf9dde000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 4, io mem 0xf9ddd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-pci 0000:07:00.2: EHCI Host Controller
ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:07:00.2: irq 15, io mem 0xfbeff000
ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb3: SerialNumber: 0000:07:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.0: irq 10, io base 0x0000a480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.2: irq 14, io base 0x0000a880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.0: irq 4, io base 0x0000a000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.1: irq 14, io base 0x0000a080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.2: irq 15, io base 0x0000a400
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.2
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:07:00.0: UHCI Host Controller
uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
uhci_hcd 0000:07:00.0: irq 10, io base 0x0000e880
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb10: SerialNumber: 0000:07:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
uhci_hcd 0000:07:00.1: UHCI Host Controller
uhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 11
uhci_hcd 0000:07:00.1: irq 5, io base 0x0000ec00
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: UHCI Host Controller
usb usb11: Manufacturer: Linux 3.8.0-25-generic uhci_hcd
usb usb11: SerialNumber: 0000:07:00.1
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:02:00.0: irq 18 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 19 for MSI/MSI-X
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb12: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 13
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb13: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 14
xhci_hcd 0000:06:00.0: irq 20 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 21 for MSI/MSI-X
usb usb14: New USB device found, idVendor=1d6b, idProduct=0002
usb usb14: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb14: Product: xHCI Host Controller
usb usb14: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb14: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 14-0:1.0: USB hub found
hub 14-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 15
usb usb15: New USB device found, idVendor=1d6b, idProduct=0003
usb usb15: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb15: Product: xHCI Host Controller
usb usb15: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb15: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 15-0:1.0: USB hub found
hub 15-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: dbae232d36ad7257df58e2fefc4fab11a387ce7c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-06-16 05:14:45 UTC (1371359685)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1172k freed
Freeing unused kernel memory: 1080k freed
udevd[89]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ahci 0000:00:1f.2: irq 22 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:05:00.1: setting latency timer to 64
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 5
ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 5
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7100 irq 22
ata4: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7180 irq 22
ata5: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7200 irq 22
ata6: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7280 irq 22
ata7: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7300 irq 22
ata8: SATA max UDMA/133 abar m2048@0xf9dd7000 port 0xf9dd7380 irq 22
ahci 0000:01:00.0: irq 23 for MSI/MSI-X
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
ata9: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff900 irq 23
ata10: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff980 irq 23
ata11: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effa00 irq 23
ata12: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effa80 irq 23
ata13: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effb00 irq 23
ata14: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effb80 irq 23
ata15: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effc00 irq 23
ata16: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9effc80 irq 23
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi16 : ahci
scsi17 : ahci
ata17: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 10
ata18: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 10
firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 20:cf:30:60:18:63
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
ata13: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
ata9.00: ATA-8: WDC WD2001FASS-00U0B0, 01.00101, max UDMA/133
ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: PLEXTOR PX-256M5Pro, 1.02, max UDMA/133
ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA PLEXTOR PX-256M5 1.02 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
ata10.00: ATA-8: WDC WD4001FAEX-00MJRA0, 01.01L01, max UDMA/133
ata10.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
firewire_core 0000:07:02.0: created device fw0: GUID 001fc60000037d35, S400
ata10.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 3337.500 MHz
Switching to clocksource tsc
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
ata4.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2 sdb3
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 2-1: New USB device found, idVendor=0424, idProduct=2514
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 3 using ehci-pci
usb 2-2: New USB device found, idVendor=04f2, idProduct=a149
usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-2: Product: HP Webcam 2100
usb 2-2: Manufacturer:
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HP Webcam 2100 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.4/input/input2
hid-generic 0003:04F2:A149.0001: input,hidraw0: USB HID v1.11 Joystick [ HP Webcam 2100] on usb-0000:00:1d.7-2/input4
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 3-4: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: PIONEER BD-RW BDR-205, 1.04, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM PIONEER BD-RW BDR-205 1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
usb 3-4: New USB device found, idVendor=1a40, idProduct=0101
usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-4: Product: USB 2.0 Hub [MTT]
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
usb 5-1: new full-speed USB device number 2 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
usb 5-1: device descriptor read/all, error -84
usb 5-1: new full-speed USB device number 3 using uhci_hcd
ata7: SATA link down (SStatus 0 SControl 300)
usb 5-1: device descriptor read/all, error -84
usb 5-1: new full-speed USB device number 4 using uhci_hcd
usb 5-1: device descriptor read/all, error -84
usb 5-1: new full-speed USB device number 5 using uhci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: Direct-Access ATA WDC WD2001FASS-0 01.0 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: Attached scsi generic sg3 type 0
scsi 9:0:0:0: Direct-Access ATA WDC WD4001FAEX-0 01.0 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg4 type 0
scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 15:0:0:0: Attached scsi generic sg5 type 3
sd 9:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 8:0:0:0: [sdc] Attached SCSI disk
usb 5-1: device descriptor read/all, error -84
hub 5-0:1.0: unable to enumerate USB device on port 1
sdd: sdd1
sd 9:0:0:0: [sdd] Attached SCSI disk
init: ureadahead main process (323) terminated with status 5
Adding 31317412k swap on /dev/sdb3. Priority:-1 extents:1 across:31317412k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[415]: starting version 175
usb 5-2: new full-speed USB device number 6 using uhci_hcd
lp: driver loaded but no devices found
usb 5-2: New USB device found, idVendor=0a21, idProduct=8001
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c70
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
usb 6-2: new full-speed USB device number 2 using uhci_hcd
type=1400 audit(1371359688.806:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=604 comm="apparmor_parser"
type=1400 audit(1371359688.806:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"
type=1400 audit(1371359688.810:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SBG6 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
nvidia: module license 'NVIDIA' taints kernel.
usb 6-2: New USB device found, idVendor=046d, idProduct=c318
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Logitech Illuminated Keyboard
usb 6-2: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.2/usb6/6-2/6-2:1.0/input/input3
hid-generic 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.2-2/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.2/usb6/6-2/6-2:1.1/input/input4
hid-generic 0003:046D:C318.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.2-2/input1
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.30 Wed Mar 27 16:56:45 PDT 2013
microcode: CPU0 sig=0x206c2, pf=0x2, revision=0xc
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
3:3:1: cannot get freq at ep 0x84
usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1[ 4.498916] usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HP Webcam 2100 (04f2:a149)
input: HP Webcam 2100 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 2-1.1: new high-speed USB device number 4 using ehci-pci
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 2-1.1: New USB device found, idVendor=0424, idProduct=2602
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 4 ports detected
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
spurious 8259A interrupt: IRQ7.
usb 2-1.2: new full-speed USB device number 5 using ehci-pci
usb 2-1.2: New USB device found, idVendor=06a3, idProduct=0bd4
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: Pro Flight Cessna Trim Wheel
usb 2-1.2: Manufacturer: Saitek
usb 2-1.2: SerialNumber: RD001338
input: Saitek Pro Flight Cessna Trim Wheel as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/input/input14
hid-generic 0003:06A3:0BD4.0004: input,hidraw3: USB HID v1.11 Device [Saitek Pro Flight Cessna Trim Wheel] on usb-0000:00:1d.7-1.2/input0
usb 2-1.3: new low-speed USB device number 6 using ehci-pci
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c018
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Optical Mouse
usb 2-1.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input15
hid-generic 0003:046D:C018.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-1.3/input0
usb 2-1.1.1: new high-speed USB device number 7 using ehci-pci
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input19
usb 2-1.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.1: Product: Flash
usb 2-1.1.1: Manufacturer: Generic
usb 2-1.1.1: SerialNumber: 10032820003E
Initializing USB Mass Storage driver...
scsi18 : usb-storage 2-1.1.1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 18:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0
scsi 18:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0
sd 18:0:0:0: Attached scsi generic sg6 type 0
sd 18:0:0:1: Attached scsi generic sg7 type 0
sd 18:0:0:0: [sde] Attached SCSI removable disk
sd 18:0:0:1: [sdf] Attached SCSI removable disk
init: udev-fallback-graphics main process (1058) terminated with status 1
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1111) killed by TERM signal
type=1400 audit(1371359692.746:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1188 comm="apparmor_parser"
type=1400 audit(1371359692.746:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1188 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1371359692.770:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1196 comm="apparmor_parser"
type=1400 audit(1371359692.770:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1196 comm="apparmor_parser"
type=1400 audit(1371359692.790:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1206 comm="apparmor_parser"
type=1400 audit(1371359692.790:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1206 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1371359692.794:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1213 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
type=1400 audit(1371359692.810:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1213 comm="apparmor_parser"
type=1400 audit(1371359692.810:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1213 comm="apparmor_parser"
init: avahi-cups-reload main process (1207) terminated with status 1
type=1400 audit(1371359692.850:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1226 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxpci: IOMMU not found (not registered)
ip_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-upstart-bridge main process (1174) killed by TERM signal
ip6_tables: (C) 2000-2006 Netfilter Core Team
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
systemd-hostnamed[13853]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-4: reset high-speed USB device number 2 using ehci-pci
usb 3-4.2: new high-speed USB device number 3 using ehci-pci
usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4.2: Product: SAMSUNG_Android_SGH-T999V
usb 3-4.2: Manufacturer: SAMSUNG
usb 3-4.2: SerialNumber: d316fcf1
cdc_acm 3-4.2:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4.2:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usb 3-4.2: USB disconnect, device number 3
usb 3-4.2: new high-speed USB device number 4 using ehci-pci
usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4.2: Product: SAMSUNG_Android_SGH-T999V
usb 3-4.2: Manufacturer: SAMSUNG
usb 3-4.2: SerialNumber: d316fcf1
cdc_acm 3-4.2:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4.2:1.1: ttyACM0: USB ACM device
usb 3-4.2: USB disconnect, device number 4
usb 3-4: reset high-speed USB device number 2 using ehci-pci
usb 3-4.2: new high-speed USB device number 5 using ehci-pci
usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4.2: Product: SAMSUNG_Android_SGH-T999V
usb 3-4.2: Manufacturer: SAMSUNG
usb 3-4.2: SerialNumber: d316fcf1
cdc_acm 3-4.2:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4.2:1.1: ttyACM0: USB ACM device
usb 3-4.2: USB disconnect, device number 5
usb 3-4: reset high-speed USB device number 2 using ehci-pci
usb 3-4.2: new high-speed USB device number 6 using ehci-pci
usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4.2: Product: SAMSUNG_Android_SGH-T999V
usb 3-4.2: Manufacturer: SAMSUNG
usb 3-4.2: SerialNumber: d316fcf1
cdc_acm 3-4.2:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4.2:1.1: ttyACM0: USB ACM device
usb 3-4.2: USB disconnect, device number 6
usb 3-4: reset high-speed USB device number 2 using ehci-pci
usb 3-4.2: new high-speed USB device number 7 using ehci-pci
usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4.2: Product: SAMSUNG_Android_SGH-T999V
usb 3-4.2: Manufacturer: SAMSUNG
usb 3-4.2: SerialNumber: d316fcf1
cdc_acm 3-4.2:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4.2:1.1: ttyACM0: USB ACM device